Carlift Spare Parts

Spare parts for vehicle lifts

From pros for pros

Huge selection

Fast delivery

Low prices

Spare parts for lifts

We offer top quality spare parts for all types of lifts at a reasonable price. We have been leaders for more than 25 years in the field of wear parts for garage lifts.

Which lift types and versions

We supply almost all spare parts for 2-column lifts, 1-column lifts, and also for scissor lifts and 4-column lifts. Due to our excellent relationships with nearly all lift manufacturers worldwide, we can obtain anything that is still available. Just ask us.

Quality and high standards

In addition to original spare parts directly from the manufacturer, we also offer accessory parts from our own production as an inexpensive alternative. Due to our decades of experience in the field of garage equipment and spare parts, we know what is important. Our main focus is on the material and faultless machining for our self-produced wear parts. In fact, the quality of our own REMO spare parts exceeds that of the original spare parts in most cases. Lift spare parts also involve safety parts, and it is precisely for this reason that there is no room for defective parts.

Available for the following brands

And many more
Zippo Spare part

Zippo Lifts

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

Consul spare parts

Consul

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

Ravaglioli spare parts

Ravaglioli

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

Nussbaum spare parts

Nussbaum

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide


Hofmann spare parts

Hofmann

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

OMCN spare parts

OMCN

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

stenhoj spare parts

Stenhoj

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

fog lift spare parts

FOG

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide


maha lift spare parts

Maha

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

Slift Spare parts

SLIFT

Tragmutter, Sicherheitsmuttern, Kugellager, Fußlager, Kopflager, Keilriemen, Zahnriemen, Gleitstücke, Elektronik, Ketten, Kettenräder, Gummiauflagen, Abdeckhauben, Höhenausgleichs Set, Wendeschalter,

butler Spare parts

Butler

Tragmutter, Sicherheitsmuttern, Kugellager, Fußlager, Kopflager, Keilriemen, Zahnriemen, Gleitstücke, Elektronik, Ketten, Kettenräder, Gummiauflagen, Abdeckhauben, Höhenausgleichs Set, Wendeschalter,

Zavagli Santi Spare parts

Zavagli Santi

Tragmutter, Sicherheitsmuttern, Kugellager, Fußlager, Kopflager, Keilriemen, Zahnriemen, Gleitstücke, Elektronik, Ketten, Kettenräder, Gummiauflagen, Abdeckhauben, Höhenausgleichs Set, Wendeschalter,


ime autolift Spare parts

IME Autolift

Tragmutter, Sicherheitsmuttern, Kugellager, Fußlager, Kopflager, Keilriemen, Zahnriemen, Gleitstücke, Elektronik, Ketten, Kettenräder, Gummiauflagen, Abdeckhauben, Höhenausgleichs Set, Wendeschalter,

romeico Spare parts

Romeico

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

beissbarth Spare parts

Beissbarth

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

herrmann Spare parts

Herrmann

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide


werther Spare parts

Werther

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

corghi Spare parts

Corghi

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

longus Spare parts

Longus

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

remo Spare parts

REMO

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide


launch Spare parts

LAUNCH

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

autop car lift Spare parts

Autop

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

autec Spare parts

Autec

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

agm Spare parts

AGM

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide


rotary Spare parts

Rotary

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

sirio Spare parts

Sirio

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

oma Spare parts

OMA

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

steril koni Spare parts

Steril Koni

Support nut, safety nut, carrier nuts, lifting nuts, main nuts, head bearing, step bearing, V-belt, drive belts, chain, pinion, rubber pad, receptacle, sliders, spindle, motor, switches, electronics, lifting carriage guide

The following spare parts can be found in our range

lifting nuts for car lifts
Carrier nuts / lifting nuts

Support nut

The support nut is the main wear part of a spindle lift. Hardly any other part of a lift has such an important and responsible task as the support nut. This carrier nut has the same inside thread as the spindle on which the nut moves the lifting carriage up and down. This support nut is made of metal or plastic, depending on the manufacturer. Support nuts support the entire weight of the vehicle that is raised on the lift.

Safety nut:

Below the support nut is the safety nut, which also moves up and down on the spindle along with the support nut. This nut will run on idle with an intact support nut without taking on load. The safety nut has the task of intercepting the support nut once the support nut is completely worn out. If the safety nut does not exchange with the support nut, there is a risk that the lift will crash when the support nut gives out next time.

Quality and machining of carrier nuts:

We carry a lot of original carrier nuts, as well as numerous nuts from our own production at reasonable prices. We place a high value on material and machining for our self-produced wear parts. In most cases, the quality of our own wear parts even exceeds those of the original spare parts.


bearing for car lifts
Lift bearings

Head bearing:

Each spindle lift needs a head and a step bearing for proper storage. The head bearing consists of at least one bearing, but may have two bearings depending on the lift manufacturer’s manner of construction. This special head bearing must hold a very heavy load, since often the whole weight of the spindle is depending on it.

Step bearing:

The step bearing is installed on the spindle bottom. This bearing also has a very important task, because without the proper step bearing the spindle cannot rotate cleanly and quietly. Depending on the manufacturer, either a heavy-duty bearing or a bushing will be installed for the bottom spindle bearing.

Quality of our bearings:

We make sure that all our bearings not only have excellent running characteristics, but also that the carrying capacity of the bearings is significantly higher than is demanded for garage use. Loud noises or even malfunctions are the result if the bearing is defective or inferior.


Chains and pinions for lifts
Chains and pinions for lifts

Drive chains:

Many 2-column lifts have a base plate on the ground that connects the two columns. In most cases there is a chain located in this base frame, which drives the motorless column. This type of lift only has one motor installed, which drives the spindle in the control column.

Chain sprockets and pinions:

A pinion is installed below on both lift spindles, using which the drive chain runs to transmit force. Pinions are made of metal in almost all cases, but in rare cases are also made of plastic. These chain sprockets are fitted with 15 – 30 teeth, depending on the manufacturer.

Quality and machining:

It is recommended to replace the chain sprockets along with the chain. If only one of the two is replaced, the new part may wear out much faster. It is important that the pinion and chain are made from the right material, otherwise loud engine noises and even malfunctions may arise that stall the raising of the vehicle.


Electronics for lifts
Electronics for lifts

Motor reversing switch:

Many lifts are operated using a phase inversion switch. This motor reversing switch has a total of 3 settings.

  1. Neutral setting: This stops the lift so that the vehicle can be worked on.
  2. Lift: This switch must be held in operation by the user; as soon as the switch is released it automatically returns to the neutral setting.
  3. Lower: As with the lift switch, this switch must be held in operation by the operator. As soon as you let go of the rotary knob, the motors and lift will stop.

Push-button:

Any lift which is equipped with a push-button will be raised or loweredby pushing this button. A main switch must be installed for this type of operation.

Main switch:

The main switch has the function of separating the lift from the current, or when it is turned on to allow current flow to the lift.

Motors / Engine:

All lifts have at least one motor for driving the platform. In most cases 2-column lifts also have two motors, so that each side is driven separately. For lifts with 2 motors no connection is necessary at the bottom between the two columns.

Circuit boards:

Many 2-columns lifts require a compensation mechanism for height adjustment of the two columns. This mechanism can be controlled in two ways: mechanically via a control cable or electronically using circuit boards. In the case of circuit boards, there is a potentiometer on each spindle which measures the spindle revolutions.

As soon as a spindle is faster than the other, it will be stopped until both sides are the same heightagain.

 

Limit switch:

Limit switches are installed in the column to stop the lift at the top and bottom positions. Once the lifting carriage triggers a limit switch, the power supply and the lift will stop.


Spindle for lifts
Spindle for lifts

Most lifts are driven by spindles in the columns. The carrier nuts that move the lift’s lifting carriage run on the spindle. Our spindles are made of extremely solid steel, guaranteeing a long service life. The carrier nuts are made of significantly softer material, so as not to damage the spindle.


Belt and driving elements for car lifts
Belt and driving elements

V-belts:

High-performance V-belts are used in most lifts in order to transmit the force of the motor to the spindle. 2-4 belts per column are common in this regard. If the belts have become worn, it can happen that they will slip under heavier loads.

V-belt discs:

A V-belt pulley is installed on the engine and on the spindle. The V-belts run on these V-belt pulleys. It is imperative that the belt size be adapted to the size of the V-belt pulley.

Toothed belt:

A few lift manufacturers install toothed belts instead of V-belts and chains. These toothed belts have the advantage of running more quietly than chains.

V-belt pulleys:

When a toothed belt is installed instead of a chain, naturally the corresponding toothed pulley must be installed so that the lift works flawlessly. It is recommended to replace the toothed belt along with the toothed belt pulleys.


rubber pads and rubber block for car lifts
Rubber pads

Rubber pads:

The rubber pad is the only part of a lift, that has direct contact with the car. Your safety is only guaranteed, if the rubber pad is in good state. There are two different possibilities to fix it on the lift. 1. you fix it with screws on the metal plate. 2. you pull it over the metal plate.

Rubber block:

With a rubber block you can safe the car from scratches of the metal plate on the lift. If you put the rubber block on top of the rubber pad, you can lift the car higher and safe the side pipes of the car from contact with the lifting arm.


Anchoring and fastening for lifts
Anchoring and fastening

Lift anchoring:

To ensure that a lift is safe, it must be properly anchored to the ground. Please ensure that you select the anchor prescribed by the manufacturer. Lifts with two motors definitely require anchoring for heavy loads.

Anchoring for heavy loads:


Lifts with base frames may also use the following anchors
Fixanchor:


 

Anchors should be chosen which fit through the hole in the column base plate. The anchor must not be longer than the depth of the concrete foundation. Before setting up the lift, please check if the concrete and the foundation are appropriate for your lift!


Lubrication and maintenance for car lifts
Lubrication and maintenance

Lift maintenance:

Lift maintenance is not only extremely important for ensuring a long service life for the lift, but also for ensuring that you can work with it safely. Maintenance must be performed at regular fixed intervals in order to ensure correct operation of the machine and precise functioning of the safety devices installed on the lift.

The following items must be serviced on a lift:

 

  • Spindle
  • Carrier nuts
  • Bearing
  • Chain and pinion
  • Lifting carriage guide
  • Rubber pads
  • V-belts

 


Lubricants for lifts:

It is extremely important to use the right lubricant to ensure a long service life for the lift. Either oil or grease is recommended, depending on the manufacturer.

The following lubricants are ideally suited for lubricating the spindle, carrier nuts, bearing, lifting carriage guide, and pinion.

Special oil:


Special grease:

This grease is specially developed for the requirements of lifts, in order to minimise wear as much as possible.


Lubrication set:

Consists of 2 litres of special oil and a grease cartridge:


spare parts for car lifts
Many other spare parts

You are looking for a replacement part that isn’t in our online shop? Just ask us, and we will do everything we can to get the replacement parts you need for your lift.

Even if you have a lift brand that isn’t mentioned here, please do not hesitate to contact us.


Payment and shipping

Payment options

pre payment
credit card

Delivery countries

And also to all other countries worldwide

VAT identification number

You have a company with a registered VAT number? Simply enter it in the order and you will not pay any German VAT


Commercial and private customers

It doesn’t matter whether you require the spare parts for commercial or private purposes – you have come to the right place!

Enquire now.


Other ways to order

www.hebebuehne24.de

Enquiry form

Email: info@remo-gmbh.de

R

More than 20,000 satisfied customers

R

More than 25 years of experience

R

More than 10,000 parts in stock

Customer reviews

Guaranteed genuine customer reviews

Spare parts overview

click

Become a partner

click

Submit enquiry

click
Translate »